• keyword :
  • Category :
  •  

Circuit design Specification ceramic printed circuit board

Date:2017年6月5日 11:43

Circuit design Specification ceramic printed circuit board

 

Specification

 

The process of circuit design begins with the specification, which states the functionality that the finished design must provide, but does not indicate how it is to be achieved . The initial specification is basically a technically detailed description of what the customer wants the finished circuit to achieve and can include a variety of electrical requirements, such as what signals the circuit will receive, Mikroel_0141_lille4.jpgwhat signals it must output, what power supplies are available and how much power it is permitted to consume. The specification can (and normally does) also set some of the physical parameters that the design must meet, such as size, weight, moisture resistance, temperature range, thermal output, vibration tolerance and acceleration tolerance.

As the design process progresses the designer(s) will frequently return to the specification and alter it to take account of the progress of the design. This can involve tightening specifications that the customer has supplied, and adding tests that the circuit must pass in order to be accepted. These additional specifications will often be used in the verification of a design. Changes that conflict with or modify the customer's original specifications will almost always have to be approved by the customer before they can be acted upon.

Correctly identifying the customer needs can avoid a condition known as 'design creep' which occurs in the absence of realistic initial expectations, and later by failing to communicate fully with the client during the design process. It can be defined in terms of its results; "at one extreme is a circuit with more functionality than necessary, and at the other is a circuit having an incorrect functionality". Nevertheless, some changes can be expected and it is good practice to keep options open for as long as possible because it's easier to remove spare elements from the circuit later on than it is to put them in.

 

 

Professional Custom Design Multilayer Pcb For Weighing Scale

TypeInfo: PCB knowledge

Keywords for the information:Circuit design  Circuit design Specification  ceramic printed circuit board